PVC Water Stopper
We are on of the top PVC Water Stopper manufacturers in india.
- PVC water stopper are flexible Plastic strips which provide a physical barrier to Water at concrete joints, mostly in basements, Water retaining structures like Water tanks, Swimming pools, structural foundations & other below ground level constructions. Water stops are also termed as Water Bars, seals construction joints. A typical water stops have two identical half on both side of a central bulb. These additional extensions are provided with the aim of increasing path length for water entering behind the edge of water stopper.
- Compounding of PVC Water Stopper: Water stopper are manufactured from Anti-Ageing customized plastic compound with PVC as a base polymer and exhibiting required properties like High Elasticity & Tensile Strength, Immune to Corrosion, Excellent weather resistant, Unaffected by acids, alkalis, metals salts and other chemicals, Lower water absorption, Withstand high Hydrostatic pressure, Can bear shocks of heavy turbines, Earth quakes, Floods.
Application in construction Industry
- PVC Water stopper act as sealant at RCC Masonry concrete joints & prevent any seepage of water in or out through joints.
- PVC water stopper withstand expansion or contraction movement at joints and take care of any deflection or displacement arising due to change in temperature, differential settlement of foundation, Geo disturbances causing Seismic forces like earth quack, thus eliminating danger of cracks
Selection of appropriate PVC Water stopper
- Ribbed Type- multipurpose water stopper design, used where differential settlement of poured concrete is expected and a firm grip in concrete is desired.
Dumbbell Type- Greater variation in temperature causes expansion or contraction of joints, Dumbbell type water stopper is suggested for these sites.
Kicker (Surface) Type: these are externally placed and are use where embedded types can not be used due to interference of steel reinforcement.
- Installation procedure: Water Stoppers are tied to steel frame work through eyelets by means of small wires (same being depicted in the adjacent figure), certain metal clamps meant to grip the water stop seal and keep it in proper position. Firstly one half of the waterstop is embedded in the concrete leaving the second half extended. Second half is also embedded leaving the centre bulb free for expansion and contraction movements.
PVC Water Stopper Area of Application
- Public Utilities : Bridges, Road Embankments, Tunnels, Water Tanks, Swimming Pools, Water Filtration plants, Swage Plants, Clarifiers, Dams, Canals, Aqueducts, Reservoirs, Irrigation Projects Cooling Towers.
- Building: Basements, Foundations Slabs, Masonry Joints, Terraces, Retaining Walls, Overhead & Underground Water Tanks, Skyscraper.
- Industries: Chemical Plants, Fertiliser Steel, Waste Treatment Plants, Thermal & Hydro Power Stations, Atomic Reactors, Shipyards & Docks
Precautions during water stop installation
- They are vulnerable to get damaged during construction.
- Compaction of concrete around waterstop should be taken care otherwise it can dislocate & could lead to a risk of honeycomb formation which may lead to leakage through concrete itself rather then through joint.
Methods for Jointing PVC Waterstops with Heater Blade
Water Stoppers can be join on site with a simple electrical heater blade.
- Water Bars of same width & design should be sharply levelled at edges using a knife.
- Turn on the Electric Heater Blade and wait will it become hot.
- Place the waterstops on both sides of heater blade & press it until it melts but without burning.
- Remove the heater blade upward.
- Joint the molten end quickly & hold them together firmly for approximately 20-30 seconds.
PVC Water Stopper with Center Bulb
- 150 (6″) x 4mm
- 150 (6″) x 5mm
- 150 (6″) x 6mm
- 150 (6″) x 8mm
- 150 (6″) x 10mm
- 200 (8″) x 8mm
- 200 (8″) x 10mm
- 225 (9″) x 5mm
- 225 (9″) x 6mm
- 225 (9″) x 8mm
- 225 (9″) x 10mm
- 240 x 8mm
- 240 x 10mm
- 250 (10″) x 8mm
- 250 (10″) x 10mm
- 250 (10″) x 12mm
- 300 (12″) x 6mm
- 300 (12″) x 8mm
- 300 (12″) x 10mm
- 300 (12″) x 12mm
- 300 (12″) x 15mm
PRE TEST REPORT
Name of the Consignee
Address
Purchase order & Date
Description
Rubber Seal Size & Quantity
Testing Standard
….
Report No: SF/KMPL/2022-23/WS/051
Date: 05-11-2022
PVC Water Stopper
230mmx 6mm
Is:15058-2002 Specification.
| S.No | Tests | IS:15058-2002 Specification Clause Number |
Permissible Limits as per IS:15058-2002 Specification |
Method of Test, Refer to |
Results |
| 1. | Physical Properties – Before Ageing | ||||
| Hardness Test | Cl.3.2 (Sl.no.iii) | 65 Shore A (min) | IS: 13360 (Part 5/Sec II) | 68 Shore A | |
| Tensile Strength | Cl.3.2 (Sl.no.i) | 13.8 MPa (Min) | IS: 8543 (Part 4/sec I) | 15.70MPa | |
| Elongation at Break | Cl.3.2 | 285% (Min) | IS: 8543 (Part 4/sec I) | 300% | |
| 2. | Stability in effects of alkalies Test For 7 Days | ||||
| Weight Increase | IS: 15058:2002 Annex C | 0.25 %(Max) | IS : 15058:2002 Annex C | 0.20% | |
| Weight Decrease | 0.10 % (Max) | 0.09% | |||
| Change In Hardness | ±5(Max) | IS: 15058:2002 Annex C/ IS: 13360 (part 5/sec II) |
-2 | ||
| 3 | Stability In effects of alkalies Test For 28 days | ||||
| Weight Increase | IS: 15058:2002 Annex C | 0.40 %(Max) | IS : 15058:2002 Annex C | 0.20% | |
| Weight Decrease | 0.30 % (Max) | 0.10% | |||
| Change In Dimension | ± 1%(Max) | -1% | |||
| 4 | Water absorption @ Room Temperature for 24 Hours | IS: 15058:2002 Annex A | +0.6%(Max) | IS : 15058:2002 Annex A | +0.52% |
| 5 | Cold bent Temparature @ -25ºC | IS:9766 Annex G | Shoub be no Crack | IS: 9766 | -28.6ºC |
| 6 | Accelerated Extraction Test @ 60-66º Temparature For 14 Days | ||||
| Tensile Strength | IS: 15058:2002 Annex B | 10.30 Mpa (Min) | IS: 15058:2002 Annex B/ IS: 8543 (Part 4/sec I) | 10.5 Mpa | |
| Elongation at Break | 280% (Min) | 283% | |||
| 7 | Dimensions | ||||
| Width | 4.1.1 | 230 ± 10 mm | IS: 15058:2002 Annex B/ IS: 8543 (Part 4/sec I) | 230-235mm | |
| Thickness | 4.1.1 | 6.0 + 2/-0 mm | 6.0-6.2mm | ||
The above tests are carried out on specially moulded test pieces as per IS:15058-2002 Specification specification and found satisfactory.
Export Packing
Dimension in CBM
PVC Water Stopper with Center Bulb
Each Roll 25Mtr
| SR No | Dimension | Length | Width | Height | CBM | Weight kg/Roll |
| 1 | 150x5mm | 0.625 | 0.625 | 0.150 | 0.059 | 40 |
| 2 | 150x6mm | 0.625 | 0.625 | 0.150 | 0.059 | 45 |
| 3 | 150x8mm | 0.625 | 0.625 | 0.150 | 0.059 | 55 |
| 4 | 200x8mm | 0.625 | 0.625 | 0.200 | 0.059 | 60 |
| 5 | 200x10mm | 0.65 | 0.65 | 0.200 | 0.078 | 64 |
| 6 | 225x5mm | 0.625 | 0.625 | 0.23 | 0.090 | 70 |
| 7 | 225x6mm | 0.625 | 0.625 | 0.230 | 0.090 | 65 |
| 8 | 225x8mm | 0.65 | 0.65 | 0.230 | 0.097 | 90 |
| 9 | 225x10mm | 0.65 | 0.65 | 0.230 | 0.097 | 100 |
| 10 | 240x8mm | 0.65 | 0.650 | 0.240 | 0.104 | 110 |
| 11 | 240x10mm | 0.650 | 0.650 | 0.240 | 0.104 | 125 |
| 12 | 250x8mm | 0.675 | 0.675 | 0.250 | 0.114 | 95 |
| 13 | 250x10mm | 0.675 | 0.675 | 0.250 | 0.114 | 115 |
| 14 | 300x6mm | 0.700 | 0.700 | 0.300 | 0.147 | 95 |
| 15 | 300x8mm | 0.725 | 0.725 | 0.300 | 0.158 | 115 |
| 16 | 300x10mm | 0.750 | 0.750 | 0.300 | 0.169 | 140 |
| 17 | 300x12mm | 0.775 | 0.775 | 0.300 | 0.18 | 140 |
| 18 | 300x15mm | 0.800 | 0.800 | 0.300 | 0.192 | 160 |
| Kiker Type | ||||||
| 19 | 230x4mm | 0.625 | 0.625 | 0.230 | 0.090 | 67 |
| Dumbbell Type | ||||||
| 20 | 230x8mm | 0.650 | 0.650 | 0.230 | 0.090 | 87 |
| 21 | 230x10mm | 0.650 | 0.650 | 0.230 | 0.090 | 100 |